Games
Board Games
Card Games
Kids Games
Puzzle Games
Travel Games
Toys & Play Sets
Bricks & Blocks
Kids Toys
Creative & Outdoor
Dart Blaster Guns
Modelling Clay & Dough
Stationery For Kids
Merchandise
Accessories
Bags
Others
Electronics
Music & Karaoke
Games Workshop
Warhammer 40k
Age Of Sigmar
Citadel Paints
Literature
Miscellaneous
A selection of guides for refilling many different ink cartridges.
...ty and prevent you from printing until a small prompt has been given. More information on this topic can be found here. This guide is intended purely to show where to inject the ink into these cartridges and how much we recommend using. For full refill instructions for these cartridges please click here. Canon PG-545 Video Refill Guide Canon PG-545XL Video Refill Guide Compatability These cartridges fit a variety of Canon printers including the Ca...
...hould now be all set to start printing again with your refilled cartridge. If your cartridge does not print correctly we recommend leaving it for a few hours or even overnight to give the ink chance to settle. With the majority of refilled cartridge the unit will still warn that it is low on ink. With the exception of Lexmark cartridges marked “Return Programme Cartridge” this will not stop you printing however and any warning can simply be ignore...
...you need is at least one syringe, plus some universal cyan, magenta and yellow ink. Simply remove the label, widen the fill holes (if necessary) and fill the relevant chambers of the Lexmark 83 ink cartridge with the amount of ink mentioned below. For these cartridges, we recommend injecting the following amount of ink into each of the chambers (cyan/magenta/yellow): Lexmark 83/018L0042E: 7ml (21ml Total) As these cartridges do not have any air ho...
...l the relevant chambers of the Lexmark 82 ink cartridge with the amount of ink mentioned below. For these cartridges, we recommend injecting the following amount of black ink into the hole closest to the printhead: Lexmark 82/018L0032E: 20ml As these cartridges do not have any air holes to fill from directly, I would recommend carefully drilling your own with a thin drill bit. This guide is intended purely to show where to inject the ink into thes...
...you need is at least one syringe, plus some universal cyan, magenta and yellow ink. Simply remove the label, widen the fill holes (if necessary) and fill the relevant chambers of the Lexmark 1, 2, 33, 35, 37A, 37XLA, 15A, 41A, 43XL & 5A ink cartridge with the amount of ink mentioned below. For these cartridges, we recommend injecting the following amount of ink into each of the chambers (cyan/magenta/yellow): 1/018CX781E: 7ml (21ml Total) 2/018C01...
...32, 34, 36A, 36XLA, 14A, 42A, 44XL or 4A ink cartridge with the amount of ink mentioned below. For these cartridges, we recommend injecting the following amount of black ink into the hole closest to the printhead: 3/018C1530: 20ml 32/0080D2956: 20ml 34/018C0034E: 20ml 36A/018C2150E: 20ml 36XLA/018C2190E: 20ml 14A/018C2080E: 20ml 42A/018Y0342E: 20ml 44XL/018Y0144E: 20ml 4A/44103105: 20ml If you have slight variants of the cartridge codes listed in...
...l the relevant chambers of the Lexmark 31 ink cartridge with the amount of ink mentioned below. For these cartridges, we recommend injecting the following amount of ink into each of the chambers (photo black/photo cyan/photo magenta): Lexmark 31/018C0031E: 7ml (21ml Total) When purchasing the inks for refilling these cartridges, you may find them described as light magenta and light cyan. These inks are the same as the “photo” variety, so please d...
...you need is at least one syringe, plus some universal cyan, magenta and yellow ink. Simply remove the label, widen the fill holes (if necessary) and fill the relevant chambers of the Lexmark 26 or 27 ink cartridge with the amount of ink mentioned below. For these cartridges, we recommend injecting the following amount of ink into each of the chambers (photo black/photo cyan/photo magenta): Lexmark 26/010N0026E: 4ml (12ml) Lexmark 27/010NX227E: 2ml...
...relevant chambers of the Lexmark 16 or 17 ink cartridge with the amount of ink mentioned below. As these cartridges do not have any air holes to fill from directly, I would recommend carefully drilling your own with a thin drill bit. For these cartridges, we recommend injecting the following amount of black ink: Lexmark 16/010N0016E: 16ml Lexmark 17/010NX217E: 8ml We recommend sticking to the lower fill for the Lexmark 17 as these cartridges have...
...you need is at least one syringe, plus some universal cyan, magenta and yellow ink. Simply remove the label, widen the fill holes (if necessary) and fill the relevant chambers of the HP 351, 351XL, 342, 343 or 344 ink cartridge with the amount of ink mentioned below. For these cartridges, we recommend injecting the following amount of ink into each of the chambers (cyan/magenta/yellow): HP 351/CB337EE: 3ml (9ml Total) HP 351XL/CB338EE: 5ml (15ml T...
