Refilling the Lexmark 26 or 27 colour ink cartridge at home is very easy and can offer you great results, with very little equipment. All you need is at least one syringe, plus some universal . Simply remove the label, widen the fill holes (if necessary) and fill the relevant chambers of the Lexmark 26 or 27 ink cartridge with the amount of ink mentioned below.
For these cartridges, we recommend injecting the following amount of ink into each of the chambers (photo black/photo cyan/photo magenta):
Lexmark 26/010N0026E: 4ml (12ml)
Lexmark 27/010NX227E: 2ml (6ml)
We recommend sticking to the lower fill for the Lexmark 27 as these cartridges have a smaller sponge and are physically restricted inside the cartridge. As such, over filling them can result in ink spilling inside your printer.
As these cartridges do not have any air holes to fill from directly, I would recommend carefully drilling your own with a thin drill bit.
This guide is intended purely to show where to inject the ink into these cartridges and how much we recommend using. For full refill instructions for these cartridges, please click here.
These cartridges are compatible with a variety of different printers, including:
-Lexmark i3
-Lexmark X1100
-Lexmark X1110
-Lexmark X1130
-Lexmark X1150
-Lexmark X1155
-Lexmark X1160
-Lexmark X1170
-Lexmark X1180
-Lexmark X1185
-Lexmark X1190 All-in-One
-Lexmark X1240
-Lexmark X1250
-Lexmark X1270
-Lexmark X1290
-Lexmark X2230
-Lexmark X2240
-Lexmark X2250
-Lexmark X74
-Lexmark X75
-Lexmark Z13
-Lexmark Z23
-Lexmark Z24
-Lexmark Z25
-Lexmark Z33
-Lexmark Z34
-Lexmark Z35
-Lexmark Z515
-Lexmark Z517
-Lexmark Z600
-Lexmark Z601
-Lexmark Z605
-Lexmark Z607
-Lexmark Z615
-Lexmark Z617
-Lexmark Z640
-Lexmark Z645
