2018-07-05T10:48:39+00:00
HP LaserJet Error 02 – Warming up
2011-10-13T14:56
October 13, 2011
If you are receiving this message please take the following steps:
- Turn the printer off.
- Unplug the USB or I/O cable from back of printer.
- Turn the printer back on again and wait for it to start up and hopefully change to “Ready”.
- If printer reports “Ready” the issue could be down to a driver problem, a defective USB or I/O port in the computer or even a faulty USB or I/O cable.
- If the printer still reports “Error 02” it is likely there is a problem with the printer itself. In this case please contact HP technical support if the machine is in warranty or a technician if the warranty has expired.
Notice
This article has been written as a general guide to the error code and as such not all of the information here will be applicable to every machine in the range. Wherever possible specific advice for certain models will be given.
About the author
Matthew Stevenson
I have been involved in the printer industry since I was 18 and have been an employee of Refresh Cartridges since early 2009. I am a dedicated family man, gamer, music fan and friend to all.
I write the majority of the content here on Igloo and am responsible for its upkeep.
Refresh Cartridges
